10 Best Gimbal For Rx100vin 2022-Reviews
Reviews Camera Gimbals

10 Best Gimbal For Rx100vin 2022-Reviews & Guide

This post was most recently updated on May 9th, 2022

Best Gimbal For Rx100vin

Best Gimbal For Rx100vin

The best gimbal for rx100v is a device that allows you to mount your camera on top and keep it steady in three dimensions as you film, even if you’re moving around. This makes it easy to get smooth, professional-looking footage without a tripod or a dolly.

READ ALSO :BEST GIMBAL FOR GO PRO 6 

They can be used indoors or outdoors, so they’re useful for interviews and event coverage, as well as run-and-gun shooting when you’re out on location.

Gimbals are also useful for vlogging because they allow you to walk around with your camera while keeping the shot steady.

1.Pilotfly C45 3-Axis Gimbal Stabilizer for Compact Camera

BrandPilotfly
Compatible DevicesCamera
Item Dimensions LxWxH1 x 1 x 1 inches
Item Weight1 Pounds

The Pilotfly C45 3-Axis Gimbal Stabilizer for Compact Camera is designed to stabilize video cameras during handheld operation with a variety of different shooting situations. The stabilizer features an integrated three-axis gimbal that supports compact cameras up to 1.5 lb and can be used in both a vertical or horizontal position. It can also be reversed for low-angle shots, allowing the camera to shoot from just inches off the ground.

The gimbal uses three 32-bit MCU processors, which are in control of the pan, tilt, and roll axes simultaneously. It helps to stabilize your camera and reduces any unwanted movements from showing up in your footage. The gimbal will keep you camera level even when walking at a fast pace or going up and down stairs, allowing you to focus on composition rather than maintaining your balance.

Key Features

The Pilotfly C45 3-Axis Gimbal Stabilizer for Compact Camera is an excellent choice of gimbal stabilizer.

Key Features:

  • 3-axis gyro stabilization system that offers a “silky smooth” and shake-free footage in nearly any situation
  • 360° rotating panning axis, 360° tilting axis, and 320° rolling axis; all three axes can be locked with a single click
  • Designed to work with cameras weighing up to 0.8 pounds (0.4 kg), specifically Canon G7X Mark II, Sony RX100 IV or Panasonic LX100, etc.

3-axis motorized gimbal stabilizer

Gimbal stabilizers can be a great help to filmographers looking to add motion shots to their projects. Handheld shots, for example, are one of the many techniques that can be used to enhance storytelling on screen. However, handheld shots usually present a problem when it comes to keeping the camera stable and level. A simple solution is using a motorized gimbal stabilizer like the Pilotfly C45 3-Axis Gimbal Stabilizer for Compact Camera, which provides a constant balancing force and offers smooth movements with reduced jerky motions.

The C45 offers up to nine hours of run time through its internal 3800mAh lithium battery (not included), and can also be powered by an external battery pack or USB power source via the DC power input port at the bottom of the handgrip (not included). It features three brushless motors that provide support for payloads weighing up to 1.1 lb (0.5 kg). The motors’ pan and tilt axes have 360° rotation, while roll axis has ~270° rotation range. All three axes are lockable with corresponding mechanical switches so you can manage how much movement you want from them during use. The camera mount comes equipped with a standard 1/4″ thread that allows you to attach your mirrorless camera or other device directly without requiring any additional mounting gear (camera not included).

For video cameras weighing up to 4.4 lb

The Pilotfly C45 is a 3-axis motorized stabilizer that supports 360º pan, 320º tilt and 320º roll rotation. It automatically compensates for bumps and tilts, providing smooth footage without any operator input. The included remote control allows you to monitor the gimbal’s orientation from up to 328′ away. Alternatively, the gimbal can be controlled using an optional Bluetooth receiver that connects to your smartphone or other small device.

This stabilizer works with video cameras weighing up to 4.4 lb and features a 1/4″-20 mounting screw on the base. A battery provides up to 6 hours of power via USB port. Alternatively, you can use an optional AC adapter when working indoors (available separately).

Quick-release camera tray bottom and top

Quick-release camera tray bottom and top can be used to mount your camera on the gimbal.

The Quick-release plate has a 1/4″-20 tripod screw which can be used to mount your camera on one side, and the other side of the plate is designed for attaching it to the quick-release clamp on the gimbal.

A knob on the top of each quick release plate allows you to adjust the height.

Ergonomic design with padded hand grip, tilt bar, and control buttons

Bestseller No. 1
Amazon Basics Matte Black Wired Keyboard - US Layout (QWERTY)
Amazon Basics Matte Black Wired Keyboard - US Layout (QWERTY)
Low-profile Keys Provide a Quiet, Comfortable Typing Experience; Simple Wired USB Connection; Works with Windows 2000, XP, Vista, 7, 8, and 10
$13.63
Bestseller No. 3

With an ergonomic design that includes a padded hand grip and tilt bar, the Pilotfly C45 can be used for both long and short periods of time without discomfort. The intuitive control buttons make it easy to operate the stabilizer with one hand.

Supports 360º pan, 320º tilt and 320º roll rotation

The Pilotfly C45 3-Axis Gimbal Stabilizer for Compact Camera is a gimbal stabilizer that supports 360º pan, 320º tilt and 320º roll rotation. It is designed for compact cameras weighing up to 2.2 lb. This handheld gimbal provides you with the ability to create smooth video while moving through a scene at the same time as your camera or while walking alongside your subject. The unique design of the Pilotfly C45 allows it to be used in two different modes: Upright mode, where the camera is kept in a normal position and handle mode, where you can flip the gimbal around so that it’s closer to your body and use it like an extension of your arm. This gives you more stability when shooting for longer periods of time.

Automatically compensates for bumps and tilts

The C45 is constructed with a strong, lightweight aluminium alloy. Thanks to it’s 3-axis gyroscope and accelerometer, the gimbal automatically compensates for bumps and tilts. With only one button on the handle, it is very easy to use. It can be turned on and off with a simple press of the button. The C45 features a joystick that allows you to control the tilt of the camera up or down or from side to side. There are also three different modes that you can select from: Pan Follow Mode (PF), Locking Mode (LK) and Sport Mode (SPT).

Advanced 32-bit MCU chip (ARM Cortex CPU)

The Pilotfly C45 is powered by an advanced 32-bit MCU chip (ARM Cortex CPU) and has a high performance and low power consumption. To make the stabilization process more efficient, we have also applied an advanced motion control algorithm with 32-bit floating point precision.

6-hour rechargeable battery life via USB port with included cable

6-hour rechargeable battery life via USB port with included cable.

With the long 6-hour battery life, a full day of shooting is not a problem for C45. Or you can just charge it using the USB power bank during your shooting and there will be no interruption at all. The standard USB charging cable is also included in the package so you can easily charge it wherever you go!

pro and cons of Pilotfly C45 3-Axis Gimbal Stabilizer for Compact Camera

Pros:

  • Smooth and stable shots
  • Easy to carry in a backpack or bag
  • Quick release camera tray
  • Ergonomic design-the handle is comfortable and easy to hold
  • 360-degree rotation along the pan axis and double 180-degree rotation along the tilt axis. This allows you to create more creative shots.
  • 6 hour battery life with two batteries, 24 hours total run time.

Cons:

Slightly heavier than other stabilizers, but lighter than my phone (iphone7). It weighs 1.3 pounds / 0.6 kilograms. The weight helps with stability. You may notice a slight noise when you power on the gimbal, but that goes away as soon as it’s fully powered up

This three-axis gimbal stabilizer from Pilotfly is designed to enable effortless capture of smooth handheld shots with compact cameras weighing up to 4.4 pounds

This three-axis gimbal stabilizer from Pilotfly is designed to enable effortless capture of smooth handheld shots with compact cameras weighing up to 4.4 pounds. It features a brushless motor and S-bus/PWM receiver compatibility for use with wireless remotes, as well as a programmable LED display for adjusting settings and functions. A built-in battery provides up to 3 hours of operation, and the unit can be used with an optional external battery pack for over 8 hours of continuous shooting.

2.Ikan MS1 Beholder Gimbal for Mirrorless Cameras

ColorBlack
BrandIkan
Compatible DevicesCellphone, Camera
Item Dimensions LxWxH3.9 x 14.8 x 7.7 inches
Item Weight3 Pounds

The Ikan MS1 Beholder Gimbal for Mirrorless Cameras (Black) is a brushless gimbal designed to stabilize a mirrorless camera. It supports cameras weighing up to 1.77 lb and has a payload of up to 2.5 lb when using a full-size lens adapter and battery grip. The gimbal features a quick release mount that also allows you to use the camera in conjunction with the ikan E-image 70mm cage and baseplate. Additionally, the unit offers three operational modes: follow mode, roll mode, and manual mode, with unlimited 360° rotation on each axis, allowing it to capture smooth shots from overhead or low angles.

The Beholder includes an 18V DC power supply for powering your camera through the included D-tap cable and features four batteries that provide up to 10 hours of operation per charge

Product Description

Give your mirrorless camera the stable support it needs for smooth, professional footage with the Ikan MS1 Beholder Gimbal. This 3-axis gimbal stabilizer features integrated camera control and supports up to 2.6 lb, allowing it to work with a wide range of cameras. The gimbal is powered by three brushless motors and offers 360° pan, tilt, and roll rotation to capture dynamic footage. It can be used handheld or mounted on a tripod or car mount using the included 1/4″-20 mounting screw on the base of the handle.

The gimbal communicates with your camera via built-in control ports for Canon EF Mount EF/EF-S series lenses and Sony E-Mount cameras that use iAuto focus mode. It also supports optional accessories like DJI Focus Handwheel (available separately) for remote lens control. Additionally, this stabilizer records up to 4K video from your camera onto optional memory cards (not included).

Key Features

The Ikan MS1 3-Axis Gimbal for Mirrorless Cameras is an advanced stabilizer that can produce footage in a variety of situations. With a built-in joystick and six programmable camera control buttons, the gimbal allows users to control their camera’s focus, zoom, shutter, and recording start/stop. The gimbal features auto-tune and auto calibration functions to fine-tune the balance of your system. When set up properly with a compatible camera, the MS1 will automatically power on and off with your camera. You can use the included thumb controller to adjust pan and tilt of your camera independently from tilt angle or create a tracking shot by locking out pan while tilting or rolling. A variety of 1/4″ & 3/8″ mounting points on multiple axes allow you to mount accessories such as monitors or microphones to expand functionality.

Additional Information

  • Weight: 0.64 pounds
  • Dimensions: 16 x 9 x 4.5 inches
  • Color: Black
  • Manufacturer: Ikan

pro and cons of Ikan MS1 Beholder Gimbal for Mirrorless Cameras (Black)

Gimbals are one of the most popular accessories for mirrorless cameras at this time. The Ikan MS1 Beholder Gimbal for Mirrorless Cameras is a handheld three-axis gimbal stabilizer, meaning it will allow you to obtain smoother footage without the need for a tripod. It’s compatible with many of the most popular mirrorless cameras on the market today, including Sony and Panasonic models.

Ikan MS1 Beholder Gimbal for Mirrorless Cameras (Black)

The Ikan MS1 Beholder Gimbal for Mirrorless Cameras (Black) is an advanced camera stabilizer that has been designed specifically to work with a number of different mirrorless camera models while providing solid performance and reliability. This gimbal body can be easily mounted on your camera via its 1/4” thread mount, which allows you to quickly set up your gimbals in mere minutes. Once you have everything mounted correctly, you will be able to record smooth video footage with virtually no bounces or shakes at all. This is because the Ikan MS1 Beholder Gimbal for Mirrorless Cameras (Black) uses a system that automatically adjusts itself depending on the movements you make while filming.

Camera Type: Professional mirrorless camera (not SLR).

Weight: 1 pound, 6 ounces (camera not included).

Dimensions: 13″ x 9″ x 6″ (33 cm x 23 cm x 15 cm).

Customer Questions & Answers

  • What makes the Ikan MS1 better than other gimbals on the market?

The Ikan MS1 provides a high level of stability and precision, allowing you to capture smooth footage without the shakes. It’s designed for DSLR and Mirrorless camera rigs between 2-6 pounds that are no more than 8 inches wide. While using this gimbal, you can pan 360 degrees continuously in both directions and get up to 6 hours of battery life. The MS1 system is incredibly easy to adjust as well—you can change batteries and balance your rig while it’s mounted on the handle. Additionally, this product includes a quick release plate so you can easily mount or unmount your camera from the gimbal while staying balanced.

  • What cameras will work with the Ikan MS1?

The Ikan MS1 works with any DSLR or Mirrorless rig that weights between 2-6 pounds, has a lens with a maximum diameter of 4 inches, is no wider than 8 inches across, and has its power source placed in front of its center of gravity (COG). These include: Canon EOS 5D Mark II/III/IV/70D (without battery grip), 60D (without battery grip), 7DII/80D; Panasonic GH4; Sony Alpha A7S II/A6300; Nikon D7200/D750; Fuji X-T2; Olympus OM-D E-M5 Mark II

Customer reviews

This is a good quality product. I’ve used other gimbals and they are too bulky or heavy. This one is light and compact. I also like the price. It’s good for the money. The packaging was good too, so it wasn’t damaged when it arrived at my house.

The customer service was also very good. They were quick to reply with answers to my questions about how to set up the gimbal and use it properly with my camera for filming things for work, school, travel, and home movies of my kids.

Overall this is a good gimbal that works well for beginners as well as professionals who want an easy-to-use product that will help them get professional looking videos made in no time!

Ikan MS1 Beholder Gimbal for Mirrorless Cameras (Black)

If Gimbal, then Gimbal.

Then you can do the following:

  • Gimbal

drwabacks of Ikan MS1 Beholder Gimbal for Mirrorless Cameras (Black)

  • Overheating issue

Ikan initially reported in their specifications that the MS1 has a 2 hour battery life. This was quickly changed after multiple reviews highlighted the actual runtime of 30-40 minutes before the gimbal became too hot and needed to be cooled down.

  • Poor customer support

While we’ve experienced excellent customer service with other brands like DJI and Zhiyun, Ikan’s customer support is sorely lacking. Our team has spent hours on lengthy phone calls that either result in vague responses or an abrupt transfer to another department without any helpful answers. We’ve even had instances where we didn’t hear back from Ikan for days, leaving us stuck waiting with a broken product as our project deadlines rapidly approached. When you need fast support for your business, Ikan’s response time can be devastatingly slow.

  • Poor lifespan

The Ikan Beholder’s biggest downfall is its short lifespan. The brushless motors burn out within the first several months of usage and will need to be replaced if you want it to continue functioning properly long term. Not only are these replacements expensive (over $100 per motor), but they’re also not very easy to find since they’re specific to this particular model of gimbal. If you use your gimbal daily as part of your work, this will undoubtedly eat into your business budget as well as add unnecessary stress when you have projects due and no functioning equipment because it broke down again so soon after being fixed last time!

3.Zhiyun Crane M2 Crane-M2 Gimbal

BrandZhi yun
Compatible DevicesCamera, Cellphone
Item Dimensions LxWxH11.02 x 6.69 x 6.3 inches
Item Weight1000 Grams
Maximum Weight Recommendation720 Grams

This gimbal for mirrorless cameras and DSLRs is ultra-lightweight at only 1.1 pounds (gimbal only), featuring a quick release plate that allows you to quickly mount your camera from the top or bottom of the gimbal. The Zhiyun Crane M2 has an innovative battery design, allowing for up to 12 hours of runtime and fast charging via USB-C. It also includes an OLED display which shows real-time shooting data, as well as two user control buttons and a scroll wheel that allow you to make precise adjustments while shooting.

The Zhiyun Crane M2 features multiple operating modes, including Pan Following Mode (PF), Locking Mode (L), Following Mode (F) and Vortex Mode (V). There’s also a dedicated phone app available for iOS/Android devices that allows you to adjust settings remotely.

Zhiyun Crane M2 [Official] Handheld 3-Axis Gimbal Stabilizer for Mirrorless Camera,

CRANE M2

The Crane 2 is a handheld gimbal for a wide variety of mirrorless and DSLR cameras. The gimbal features a maximum payload of 7 lb, a quick release design for fast setup, and multiple accessory mounts for additional equipment. Built into the handle is an OLED screen that displays various gimbal settings, such as motor torque, follow speed, battery life, and more. A joystick enables you to control the position of your camera while attached to the gimbal.

Three 32-bit MCUs (Motor Control Units) power the Crane 2 with their high calculation capabilities and fast response speeds. In addition to offering up to 12 hours of runtime on a single charge of its included battery, the Crane 2 can also be used to charge your mobile devices via USB Type-A port on the handle. It also supports wireless Bluetooth connectivity as well as an optional wired connection with compatible cameras through its built-in USB Type-C port

THREE-AXIS HANDHELD GIMBAL STABILIZER

Crane M2 is designed to hold all kinds of mirrorless cameras. In order to achieve better balance, it is recommended to use the lens which weighing 1kg or less. But also you can find the balance when using a heavier lens by adjusting the position of camera on the gimbal.

No, there are no specific requirements on camera’s size and weight. However, it is recommended to use a lighter camera with smaller volume for optimal balance. The maximum payload capacity of Crane M2 is 2 kg, which works well with most mirrorless cameras in current market, such as Panasonic G7/G9/GH5/GH5S/GX9, Sony A6300/A6500/A6600/A7RIIILUMIX S1H etc.. Zhiyun will keep upgrading its products in time.

Designed for Mirrorless Cameras and Smartphones

The Crane M2 is designed for mirrorless cameras and smartphones. With a wide range of camera compatibility and fine-tuned controls, you can shoot like a pro with your smartphone or mirrorless camera.

Quick Install and Easy Balance Adjustment

Quick Install and Easy Balance Adjustment

The quick-release plate locks onto the bottom of your camera using a single knob for easy installation and removal. When mounted the camera is supported by a 1/4″-20 thread on the bottom of the quick release plate.

Two adjustment thumbscrews allow you to adjust roll and tilt balance.

Support Different Shooting Styles with the One-Piece Grip

You can hold the Crane M2 in a variety of different ways, making it easier to capture the shot you want.

Shooting Vertical: Hold the gimbal with only one hand, and tilt it to shoot vertically. This method is perfect for capturing street scenes or selfies. (We do not recommend holding the gimbal this way for long periods of time.)

Shooting Horizontal: Hold the gimbal like a regular camera. This position makes it easy to frame your shots and track your subjects smoothly.

Sideways Shooting: Hold the gimbal sideways so that you can capture taller subjects from top-down or from low angles.

Extendable Phone Holder for Shooting at Different Angles

The Crane M2 is a 3-axis gimbal stabilizer compatible with both smartphones and mirrorless cameras. Designed to be foldable, the stabilizer can easily slip into a camera bag without taking up too much space.

Extendable Phone Holder for Shooting at Different Angles

With an extendable phone holder that extends from 5 to 6.7 inches, you can attach your smartphone and shoot at different angles. It is also compatible with most phones on the market.

Multiple 1/4″ Threaded Holes for Max Creative Freedom

Zhiyun Crane M2 [Official] Handheld 3-Axis Gimbal Stabilizer for Mirrorless Camera, Pocket Camera, Action Camera with Multiple 1/4″ Threaded Holes for Max Creative Freedom

Multiple 1/4” threaded holes on both top and bottom of the gimbal offer various mounts for microphones, lights and other add-ons to expand your shooting possibilities. With a max payload of 300g, Zhiyun CRANE M2 allows you to create more freely when shooting with micro camera or action camera.

Real-Time Focus&Zoom Control via Smartphone

The Zhiyun Crane M2 offers real-time focus and zoom control via your smartphone. The user can use the ZY Play app (available for iOS and Android) to control the focus and zoom of the camera, or connect a Bluetooth remote controller like the Moza AirCross 2.

Control Gimbal Settings and Switch on/off Via ZY PLAY App (iOS & Android)

Download the ZY Play App

Select “Crane M2” and connect your gimbal to the app via Bluetooth

Adjust motor strength/smoothness/follow speed with the sliders on your mobile screen

When done, save your settings as a profile for easy access in future

1.8″ OLED Display to Show Shooting Information(Including Battery Level, Working Mode, Bluetooth Connection Status) and Button Control to Change Modes

The first thing you’ll notice about the Crane M2 is how well it’s built. It’s a tough and sturdy piece of equipment, but at the same time, it works surprisingly smoothly, which means that you can get some really smooth footage with a range of different camera and lens combinations. The motor are pretty quiet, so they don’t interfere too much with your audio recording while filming.

The SET Button Could Change Parameter Settings and Operation Modes of the Gimbal(Vertical Mode, Flashlight Mode, Inverted Mode, Follow Mode, Lock Mode) and Reset the Gimbal After Changing a Payload.

The SET button could change parameter settings and operation modes of the gimbal(Vertical Mode, Flashlight Mode, Inverted Mode, Follow Mode, Lock Mode) and reset the gimbal after changing a payload.

  • Switch Operation Modes

Press and hold Set Button for 2s to switch between different operation modes.

The Zhiyun Crane M2 provides a comfortable and flexible stabilizing handle for handheld video shooting with mirrorless cameras such as the Panasonic Lumix DC-GH5 or Fujifilm X-T2.

  • The Zhiyun Crane M2 provides a comfortable and flexible stabilizing handle for handheld video shooting with mirrorless cameras such as the Panasonic Lumix DC-GH5 or Fujifilm X-T2.
  • The one-piece grip design can be used with a single hand or two hands.

drwabacks of Zhiyun Crane M2 [Official] Handheld 3-Axis Gimbal Stabilizer for Mirrorless Camera,

The Zhiyun Crane M2 retails at $349. This is a lot less than other gimbals in the market. But there are some drawbacks to consider:

  • Because the box is so large and heavy, you have to pay more for shipping if it’s not sold by Amazon.
  • The items inside the box are also very heavy, which could be an issue if you have to carry this bag around all day.
  • You’ll need some time to get used to using this gimbal as it is quite large and not very intuitive at first.

4.Zhiyun Crane-M2 [Official] Handheld 3-Axis Gimbal Stabilizer

ColorBlack
BrandZhi yun
Compatible DevicesCamera
Item Dimensions LxWxH10.51 x 2.72 x 5.43 inches
Item Weight0.5 Kilograms

The Crane M2 is a 3-axis gimbal stabilizer that supports cameras weighing up to 400g – 800g and smartphones weighing up to 220g.

You can mount the gimbal via the 1/4” screw on the bottom for use as a tripod or you can remove it using the quick release plate and hand grip for handheld use.

Zhiyun Crane M2 [Official] Handheld 3-Axis Gimbal Stabilizer for Mirrorless Camera, Gopro, Smartphone with Grip Tripod

The Zhiyun Crane M2 [Official] Handheld 3-Axis Gimbal Stabilizer for Mirrorless Camera, Gopro, Smartphone with Grip Tripod is built to hold DSLR and mirrorless cameras with a lens of up to 6 lb. The gimbal has a three-axis motorized stabilization system that provides 360° coverage in the pan, tilt, and roll axes to keep the camera level and balanced at all times.

Crane M2 is a 3-axis gimbal stabilizer that also can be used as a tripod.

Crane M2 is a 3-axis gimbal stabilizer that also can be used as a tripod. The Crane M2 comes with four operation modes, POV Mode, Following Mode, Vortex Mode and Go mode. It supports cameras up to 400g – 800g and smartphones weighing up to 220g. With the built-in mini tripod, it can be attached to any light stand or telescopic pole. A detachable handle makes it easy to carry around with you wherever you go. The newly developed ZY Play App allows you to control your Crane M2 remotely through Bluetooth connectivity while also giving you access to advanced camera controls such as changing camera settings and exposure compensation directly on the app.

It supports cameras up to 400g – 800g and smartphones weighing up to 220g.

The Crane M2 supports mainstream mirrorless cameras and Gopro & smartphones weighing up to 800g and 220g respectively.

With the 3/8” thread hole under the gimbal, users can attach Crane M2 onto a tripod or slider without any additional accessories, and thus your camera can be seamlessly switched from handheld mode to a stationary mode.

Oops! Click Regenerate Content below to try generating this section again.

In addition to the Original ZY Play APP for motion timelapse and panoramic photography, Crane M2 also supports multiple mainstream camera brands including Sony, Canon and Panasonic. You can also easily switch between three different control modes via the App.

The ZY Play APP allows you to control the gimbal using your Smartphone. In addition to the Original ZY Play APP for motion timelapse and panoramic photography, Crane M2 also supports multiple mainstream camera brands including Sony, Canon and Panasonic. You can also easily switch between three different control modes via the App.

pro and cons of Zhiyun Crane M2 [Official] Handheld 3-Axis Gimbal Stabilizer

PROS

  • Lightweight and compact, fits in my camera bag with the rest of the gear. – Easy to use with all of the necessary accessories and cables in the kit.
  • Great battery life and power supply options (power bank or USB charger). – Built-in tripod stand is handy for keeping it upright on a flat surface when not being used.

CONS

  • Firmware updates are required before it will work as advertised. Zhiyun requires you to update your gimbal’s firmware via their website, but I was never able to get past step 1 because their firmware updater software kept crashing on my Mac OS X system (10.)13.4). – Gimbal not smooth enough for professional work. I’m using this with a Sony A7III which is a pro level full frame mirrorless camera which has excellent 5 axis image stabilization built into it already, so the bar is set high in terms of what kind of gimbal performance would be acceptable for professional video production work at this point by comparison. The Zhiyun Crane M2 moves so much when you walk that I can’t imagine using it in any kind of production environment where clients are paying money for me to produce smooth, fluid video footage without getting jitter and shake from this gimbal moving around erratically due to its own weight/mass as well as wind resistance etc., making it unusable in many situations where other less expensive gimbals would perform better than this one does (even without having any electronic stabilizers built into them like some other models have). The only way I can see using this product would be if there was no movement at all on set since even slight breezes outside or walking up stairs inside could cause problems here due to how sensitively balanced these devices really need to be calibrated perfectly every time before they’ll operate properly according to reviews posted elsewhere online by other customers who have purchased similar products recently too… – Noisy

【Crane M2】 is a 3-axis handheld & tripod gimbal stabilizer for mirrorless camera and GoPro & smartphone.

【Crane M2】 is a 3-axis handheld & tripod gimbal stabilizer for mirrorless camera and GoPro & smartphone.

It supports cameras up to 400g – 800g and smartphones weighing up to 220g.

5.Zhiyun Crane-M Professional 3-Axis Brushless Handheld Gimbal 

BrandZHIYUN
Compatible DevicesCamera
Item Dimensions LxWxH5.91 x 15.75 x 7.87 inches
Item Weight0.74 Kilograms

Zhiyun Crane Plus Pro 3-Axis Handheld Gimbal Stabilizer

Editor’s Choice

$799.00 at Adorama

What is the best gimbal stabilizer? What can you do with it?

The best gimbal stabilizer should be able to produce smooth videos, have a compact design, and have features that make your production work easier. It should also be compatible with your camera and phone and fit within your budget. The Zhiyun Crane Plus Pro 3-Axis Handheld Gimbal Stabilizer meets these needs for both phone and camera users.

You can use a gimbal stabilizer to take smooth photos and videos in any environment, including extreme conditions like sports or action activities. It is also useful for taking vlogs on the go or covering events such as weddings or fashion shows.

Key Features

The Crane Plus Pro is able to support a payload of up to 3kg and has been designed to be compatible with most DSLR cameras. This makes the gimbal suitable for a variety of professional filmmaking and photography applications. The Crane Plus Pro also includes a TransMount Servo Follow Focus, which can be mounted directly onto the handle without any tools. This enables you to have full focus control right in the palm of your hand, so you can enjoy smoother and more precise focus control while filming.

The Crane Plus Pro comes with a TransMount Image Transmission System, which allows you to monitor whatever your camera is pointing at in real time on your smartphone screen or other monitoring device. The system consists of an image transmission receiver, as well as two image transmission adapters for both micro-USB and Type-C devices such as smartphones or monitors.

A TransMount Focus Wheel is included with the gimbal that slides over the handwheel on one side and connects it to other devices for added versatility. The Focus Wheel enables you to remotely pull focus from a distance and allows you to take advantage of pre-programmed focal points when recording footage at different angles or heights, making it ideal for users who want more creative freedom when shooting video content.

For fast lens changes, the Crane Plus Pro includes three TransMount Quick Release Plates that are compatible with all Manfrotto quick release systems. These plates allow users quick access into their bags without having to re-balance their equipment on set whenever they need new gear out of their bags.

What’s In the Box?

GIMBAL

SERVOFOCUS

IMAGETRANSMISSIONMODULE

IMAGETRANSMISSIONRECEIVER

FOCUSWHEEL

MAXPOWERKIT

MINITRIPOD

pro and cons of Zhiyun Crane Plus Pro 3-Axis Handheld Gimbal Stabilizer

We’ll now get into the pros and cons of the Zhiyun Crane Plus Pro 3-Axis Handheld Gimbal Stabilizer.

The good:

This Gimbal is easier to use because it comes with a camera crane, which helps keep your camera balanced throughout the day, even during long flights. It’s lightweight and can also be used as a monopod for professional videographers, making this product versatile and convenient. The quality of the images taken from this Gimbal are impressive. You’ll feel like you’re flying through space, but without having to leave your living room. It takes about two hours for one battery to fully charge, so you can have it ready to go in no time at all. If you’re looking for something that will not break the bank but still provide excellent footage, then this is definitely worth considering.

The bad:

This gimbal may not be ideal for beginners since it requires some technical knowledge on how to balance cameras properly in order to get optimal performance out of them while they are mounted on cranes like these (i.e., making sure that they stay centered). Additionally, charging time can vary depending on what type of battery you have installed – if it’s lithium ion batteries then they typically last up to four hours before needing another charge; however if those batteries run out sooner than expected then either an external power source would need

to be used or additional ones purchased separately (which means less money saved over time).

Pro Crane Plus specs.

We were blessed with a beautiful sunny day in February, and we had a shoot set up at the base of Burke Mountain. The cold winds of winter had passed, and spring was on its way. As soon as I saw that the sun was shining through a gap in the clouds and that it would be clear all day, I knew I wanted to get out there.

I’m a huge fan of handheld gimbals, but this was my first time trying one out in public. We were shooting at such an odd angle (viewing camera looking down on model) that it put me off at first because I worried people would laugh or ask how we’d gotten so dirty when we walked in. However, once I got going with my shot and began testing out Zhiyun Crane Plus Pro 3-Axis Handheld Gimbal Stabilizer, it was love from there on out!

The stabilizer is great for high-quality shots with any kind of video feed you’re using—including DSLRs with video lenses attached! It’s easy to see why professional videographers have been adding stabilizers to their rigs—it makes them so much easier to maneuver when you want that bump-and-go mentality right where you need it!

Features compared with original Zhiyun Crane and Weebill Lab.

This gimbal is more suitable for any DSLR camera, including Canon 5D series camera, Panasonic GH4/GH5, Sony A7SII/A7SIII, etc. It has a max payload of 3kg / 6.6lb which is a big difference compared with Gimbals like Zhiyun Weebill Lab (payload: 0.66lb) and the older version Zhiyun Crane V2 (payload: 2.65lb).

Who is the Pro Crane Plus for?

The Crane Plus PRO is for anyone looking for a professional gimbal to support their DSLR camera. It is also for anyone looking for a gimbal with more control and convenience.

If you want a professional and reliable gimbal, the Crane Plus PRO might be your best option. The Crane Plus PRO is also an excellent option if you are looking to use your mobile device as well as your DSLR camera on one gimbal.

Potential Downsides / Dealbreakers?

  • No wireless app support
  • No Image Transmission
  • No Focus Wheel
  • No TransMount Servo Follow Focus
  • No TransMount Image Transmission System
  • No TransMount Lite Wireless Image Transmission
  • No TransMount Image Transmission Module
  • No TransMount Servo Focus Controller

The Crane Plus PRO has many upgrades from the original. The larger payload of this device – 3kg / 6.6lb max – is more suitable for any DSLR camera, including Canon 5D series camera, Panasonic GH4/GH5, Sony A7SII/A7SIII, etc. What’s more, new functions like the TransMount Servo Follow Focus, Image Transmission System and Focus Wheel make it much easier to control the camera and create professional cinematic shots. It even has a dedicated button that can be used to quickly switch between follow focus mode and shooting mode in real time.

  • The Crane Plus PRO has many upgrades from the original. The larger payload of this device – 3kg / 6.6lb max – is more suitable for any DSLR camera, including Canon 5D series camera, Panasonic GH4/GH5, Sony A7SII/A7SIII, etc.
  • What’s more, new functions like the TransMount Servo Follow Focus, Image Transmission System and Focus Wheel make it much easier to control the camera and create professional cinematic shots. It even has a dedicated button that can be used to quickly switch between follow focus mode and shooting mode in real time.

drwabacks of Zhiyun Crane Plus Pro 3-Axis Handheld Gimbal Stabilizer

  • No wireless follow focus, so you won’t be able to program the Crane Plus Pro to follow your subject while they move through space while you yourself are also moving through space.
  • No wireless image transmission, so you won’t be able to monitor live video that’s being shot on a smartphone or another device.
  • No wireless remote control, so the person operating the gimbal won’t be able to control its movements via a remote controller.
  • No wireless smartphone app control, so the person operating the gimbal won’t be able to use their smartphone as a remote controller to use features like smart-tracking and panorama (it might not even be possible for a smartphone app).
  • No wireless time-lapse functionality, so any time lapse videos that are shot using this product may not turn out very good at all.
  • No wireless touch screen, which means it will be hard for users who have large fingers or poor eyesight because there is no tactile feedback when pressing buttons on this thing!
  • In short—this device requires you do resort back too many of those old fashioned things like touching buttons with your hands and looking at them instead of just swiping your phone screen while doing whatever else it is that needs doing in life (we all know how much easier iphones make everything!)

6.Zhiyun Crane 2S, 3-Axis Handheld Gimbal Stabilizer

ColorBlack
BrandZhi yun
Compatible DevicesCamera
Item Dimensions LxWxH23 x 12 x 6 inches
Item Weight2.76 Pounds
Maximum Weight Recommendation3.2 Kilograms

As a 3-axis gimbal, it supports the following models: Canon 5D4, Panasonic GH5/4/3, BMPCC and Sony A7 series. The Crane 2S has a strong load bearing capacity which can support up to 3kg. This duration is recorded from 0.01 seconds to 99 hours 59 minutes and 59 seconds. It provides an OLED display for easy reading of parameters such as battery power, rotary angle and mode selection.

The joystick on the right side can be used to control the movement of the pan axis and perform various quick settings on the device (such as speed adjustment). The joystick on the left side can be used to control camera focus when used with a Zhiyun lens motor (ZW-B02 or ZW-E1 / E2) via a USB Type C connection. In addition, there are three buttons on each side of the handle which respectively control the panning axis, tilting axis and rolling axis.

Perfect camera balancing

The Zhiyun Crane 2S is a 3-axis handheld gimbal stabilizer for DSLR and mirrorless cameras. It’s suitable for Sony A7 series, Nikon Z6/Z7, Panasonic GH5 and all other mainstream interchangeable lens cameras with a maximum payload of 3.2 kilograms. You can perfectly balance the camera in the horizontal direction and the vertical direction, which means you can use it to shoot stable videos even in high-speed motion scenes. Its arm is flexible and has a strong bearing capacity. The perfect balance can be achieved by adjusting it so that it’s as close as possible to the center of gravity of the camera.

Strong carrying capacity

A strong carrying capacity that supports a wide range of cameras. The max payload is 3.2kg, which enables you to use it with most DSLR cameras including Canon 5D Mark IV, Sony A7 series and so on.

OLED screen and smart phone APP

The large OLED display shows the real-time status of tilt angle, pan angle and roll angle, battery status, mode and follow speed. You can quickly switch between modes by long pressing “M” button. When in setting interface, you can set parameters such as follow speed, smoothness for different shooting situations.

Compatible with multiple cameras and lenses

Compatible Cameras (Including but not limited to): Sony A7M3/A7R3/A9/ A6300/ A6500, Panasonic GH5S / GH5 / G9, Canon M50 / M5 / 5D4, Nikon Z6/Z7.

Compatible Lenses (Including but not limited to): Sony E 16-55mm F2.8 G Lens, Canon EF 24-70mm f/2.8L II USM Lens; Nikon AF-S 24-120mm f/4G ED VR Lens, Panasonic Leica DG Vario-Elmarit 50-200mm f/2.8-4 ASPH. POWER O.I.S., Olympus M Zuiko Digital ED 12-40mm F2.8 Pro Lens etc.(Note: When using a lens with too short focal length or when the tilt angle of the camera is relatively large during shooting, it’s easy to cause interference between the stabilizer and the lens)

This gimbal stabilizer will help you take amazing, smooth photos and videos.

Whether you’re using a DSLR or mirrorless camera, this gimbal is perfect for helping you take amazing photos and videos. With its intuitive design and easy to use interface, the Crane 2S offers a whole new range of shooting possibilities for content creators. This gimbal will help you capture the moments you want to remember – whether that’s your baby’s first steps, a wedding proposal in Central Park, or a stunning sunset on top of Machu Picchu. Easy to use with just one hand, the Crane 2S provides up to 18 hours of battery life so you can capture as many special moments as possible. This gimbal stabilizer also helps you share your story because it connects wirelessly to smartphones via WiFi and Bluetooth so that your followers can see everything in real time.

While we love shooting stills with this gimbal stabilizer, we also love that it has five different modes that allow us to be creative with our camera movements. In Pan Following mode (PF), your camera stays locked on one object while the horizon remains level; in Full-Follow mode (F), both the pan and tilt axis follow your subject’s movement; in Locking mode (L), no matter what direction the crane 2s is tilted or panned, only horizontal/vertical motion will be captured; In POV Cinematic Mode (POV), no matter how fast or slow your arm moves, Crane 2S follows every turn smoothly and precisely; In Vortex Mode (VTX), by simply pressing a button on the handlebar users can create 360°bullet-time effect shots like those seen in blockbuster movies such as The Matrix.

drwabacks of Zhiyun Crane 2S, 3-Axis Handheld Gimbal Stabilizer for DSLR and Mirrorless Camera, Crane2 Upgraded Version

The Zhiyun Crane 2S, 3-Axis Handheld Gimbal Stabilizer for DSLR and Mirrorless Camera, Crane2 Upgraded Version is a gimbal that is great for stabilizing your camera. It makes for very smooth shots. The only downside of this gimbal is that it isn’t waterproof. Because of this, you have to be careful when using this gimbal in wet situations. Another drwaback to the Zhiyun Crane 2S, 3-Axis Handheld Gimbal Stabilizer for DSLR and Mirrorless Camera, Crane2 Upgraded Version is its weight. The Zhiyun Crane 2S can be heavy and one might want to consider making a handle for the Zhiyun Crane 2S if they plan on using it oftenly because it can tire out your arms easily. Another con about the Zhiyun Crane 2S, 3-Axis Handheld Gimbal Stabilizer for DSLR and Mirrorless Camera, Crane2 Upgraded Version is that it requires a lot of batteries because sometimes they run out after 5 hours of use even though it saids they are supposed to last 18 hours.

7.FeiyuTech AK2000C Gimbal 3-Axis Handheld Stabilizer

BrandFeiyuTech
Compatible DevicesCamera, Cellphone
Item Dimensions LxWxH5.8 x 8.02 x 14.68 inches
Item Weight1 Kilograms

AK2000C, the first generation of AK series, it is also the first professional gimbal of FeiyuTech that supports for large size mirrorless cameras and DSLR cameras.

AK2000C adopts overall magnesium alloy materials, which is also adopted by aviation industries, with high strength and lightweight. The design of detachable handle bar makes AK2000C easy to carry around and store in a small space.

Whether it is used with Canon EOS 5D Mark IV or Sony ILCE-6300L , Panasonic GH5 and other SLR full format cameras or APS-C frame models such as Sony A6400 , Canon EOS M50 , Nikon Z50 etc., AK2000C can successfully support them all.

Camera Stabilizer

The FeiyuTech AK2000C Camera Stabilizer is a gimbal stabilizer that allows you to take sharp, clear shots in any environment. It supports up to 4kg (8.82lb) of camera equipment, which can be arranged in numerous configurations to suit your preferences. The gimbal has a carbon fiber body for durability and lightness and is designed with three axes of motion: roll, pan, and tilt.

The included quick-release plate allows you to quickly attach or detach the camera from the gimbal while the accessory slot lets you add other tools such as an LED light or microphone. The gimbal also features a USB Type-C port for charging or connecting external devices; a 3/8″-16 threaded hole for mounting on tripods; and joystick controls for adjusting focus and framing shots on the fly. Additionally, it can run continuously for up to 11 hours per charge using the built-in battery

introduction of FeiyuTech AK2000C [Official] Camera Stabilizer,

FeiyuTech

FeiyuTech was founded in 2007 and is headquartered in Shenzhen, China. It has two manufacturing bases, one of which is located in Dongguan, Guangdong Province and the other is located in Wenzhou, Zhejiang Province. As a leading gimbal manufacturer with world-class R&D capabilities, manufacturing and sales teams, FeiyuTech has established a global distribution network in over 50 countries and regions around the world.

FeiyuTech AK2000C [Official] Camera Stabilizer, 3 Axis Handheld Gimbal Stabilizer for DSLR Camera Mirrorless, 4.85lbs Payload Touch Screen, for Sony Canon Panasonic Nikon Fujifilm,Wi-Fi/Cable Control

Features:

  • The AK2000C camera stabilizer is specially designed for the native cameras and lenses on the market. It features a max load of 4.85lbs, enabling you to handle most of the native cameras and lenses on the market.
  • The AK2000C can be operated via Wi-Fi as well as USB cable, using several different mobile applications to control and set up your gimbal for your shooting needs.
  • The brand new A/B axis lock design enables quick switch between undersling mode and upright mode, giving you more opportunities to create stable shots in all scenarios.

pro and cons of FeiyuTech AK2000C [Official] Camera Stabilizer,

Pros:

  • High payload, 3800g to be exact (which is good for the heavy lenses used by professional filmmakers)
  • Can use a massive battery (AK2000C can use a 26650 battery, which provides very long usage time)
  • Internal motor damping system for improved performance (this is important when it comes to smooth and stable shots)

Cons:

  • It’s expensive! ($699.99 in Amazon)

Latest three-axis stabilization technology: the AK series inherits its excellent performance. The wide range of tracking perspectives and its quick response enable users to shoot more freely than ever before

You’ll be able to capture any moment with smoothness and precision. Equipped with the latest three-axis stabilization technology, the AK series inherits its excellent performance. The wide range of tracking perspectives and its quick response enable users to shoot more freely than ever before.

drawbacks FeiyuTech AK2000C [Official] Camera Stabilizer,

If you are a novice, it might take some time to learn how to master the gimbal. The joystick is extremely sensitive and takes a lot of practice to use. Also, the battery life is not very long and needs to be charged after about 6 hours of use. Finally, the customer support for this product is also weak so if something does go wrong you are on your own.

8.MOZA AirCross Gimbal 3-Axis Handheld Stabilizer for Mirrorless Camera DSLR Cameras Ultra-Lightweight

BrandMOZA
Compatible DevicesCamera
Item Weight1050 Grams
Maximum Weight Recommendation1.8 Kilograms

MOZA AirCross is the first mirrorless camera gimbal with a quick-release system, very good to use. MOZA AirCross gimbal uses quick-release system to provide a much easier way for you to take your cameras on and off the gimbal. Not only does this make it more convenient for you to change different setups, but it also makes it possible for others to control the gimbal without holding onto your expensive gear.

The MOZA AirCross 3-Axis Handheld Gimbal is a compact handheld stabilizer designed for mirrorless cameras and DSLRs weighing up to 4 lb. It offers 360° pan, 320° tilt, and unlimited roll rotation on each axis, allowing you to capture smooth footage while walking or moving around obstacles. The AirCross features auto-tuning technology that analyzes your camera’s weight and balance and automatically adjusts its settings accordingly, saving you time when switching between lenses with different sizes and weights. A wireless remote control allows you to change settings without touching the gimbal.

The MOZA AirCross is a great little gimbal for anyone looking for something lightweight and easy to use. One of the best features of this gimbal is that it can be set up easily by anyone

9.Hohem iSteady Multi 3-Axis Gimbal Stabilizer

BrandHohem
Compatible DevicesCellphone, Camera
Item Weight18.7 Ounces

A pocket-sized, 3-axis mobile handheld gimbal stabilizer that turns your smartphone into a professional filmmaking camera.

It is easy to carry and use even on the go or while traveling. It can rotate 320° in the tilt and roll directions to capture perfect pictures and videos. The gimbal is compatible with most smartphones ranging from 2.2″ to 3.4″. It features low power consumption, long running time, advanced electronic image stabilization technology, active track, zoom control, time-lapse photography mode and panorama shoot mode for taking stunning pictures and videos anywhere at any time

[3.5lbs Payload] The hohem iSteady Multi is designed for mainstream compact digital camera on market, such as Sony RX100 series, Canon G7X II, Panasonic LX10 and more.

No matter what you are shooting, the hohem iSteady Multi will give you super smooth shots without unwanted shaky and jerky movements. Improving your vlogging and photography experience!

Built-in bluetooth with latest APP control system, you can easily adjust all parameters for gimbal or camera to get your preferred creative look by changing gimbal settings:

Adjust working mode of gimbal.

Control movement speed of 3 axis.

Switch lock/unlock status of 3 axis.

One key to reset the current angle of gimbal.

[720°Rotating Flip] Incredible 720°panning rotation and 245°tilting angle range enable the multi to capture firm shot every time.

720°Rotating Flip : Incredible 720°panning rotation and 245°tilting angle range enable the multi to capture firm shot every time.

[Multiple Shooting Modes] Isteady Multi supports Lock mode, Pan Follow Mode and All Locked Mode, which enables you to creat much smoother shots in any environment!

🎥【Multiple Shooting Modes】Isteady Multi supports Lock mode, Pan Follow Mode and All Locked Mode, which enables you to creat much smoother shots in any environment!

🎥【Multiple Compatible Devices】The Isteady Multi is compatible with up to 1.1lbs smartphones, action cameras or compact mirrorless cameras such as Sony RX100 VI / VII Panasonic ZS200 / ZS70 Canon G7X III / G7X Mark II etc.

🎥【360° Rotation & Fast Charging】Supports up to 360° rotation on all three axes! Rechargeable battery offers up to 6 hours of runtime on a single charge (USB-C 5V/2A fast charging). Just get your phone clip and connect it with the stabilizer via Bluetooth and APP ISteady multi will help you create amazing videos easily!

Note: The camera and mobile phone are not included in this product package.

[Intelligent APP Control] With the intelligent APP (hohem Gimbal), you can make quick adjustments to the motor strength, monitor battery life and more through your smartphone.

The hohem Gimbal App gives you an intelligent and convenient way to control your gimbal. The app allows you to adjust the motor strength, monitor battery life and more through your smartphone. With multiple adjustment options, this app is sure to increase the speed in which you get the perfect video. It is also a great tool for quick response during shooting modes.

pro and cons of hohem Isteady Multi 3-Axis Handheld Stabilizing Gimbal for Compact Digital Camera

The hohem Isteady offers many advantages over other handheld gimbals. For starters, it is extremely portable and user-friendly. If you don’t want to lug around all your equipment, or have a lot of space in your bag for a bulky item, the hohem Isteady can be easily folded for convenient storage. Additionally, its simple operation means that even the most inexperienced users will be able to take great photos with the device in no time at all. The hohem Isteady also has several built-in features that make it stand out from other stabilizers like motion sensors and Bluetooth capabilities that allow you to connect with mobile apps wirelessly through Wi-Fi on Android phones or tablets (but not iPhones).

However, there are some drawbacks associated with using this particular gimbal as well: one being its limited battery life which only lasts up to five hours before needing another charge; another potential issue could come up when shooting images without any movement because these types of photos tend not to turn out very crisp due

““

[Portable and User-Friendly Design]: Extremely lightweight and portable design(only 2.8 lbs). Support up to 6 hours of battery life (upgraded to 6500mAh) with fast charging technology.

Portable and User-Friendly Design: Extremely lightweight and portable design(only 2.8 lbs).

Support up to 6 hours of battery life (upgraded to 6500mAh) with fast charging technology.

drwabacks of hohem Isteady Multi 3-Axis Handheld Stabilizing Gimbal for Compact Digital Camera

While this stabilizer is good for the price and has a lot of features that other gimbals don’t have, it’s not perfect. The main drawbacks are its limited compatibility with phones, the cost of accessories, and the lack of support for some cameras. Let’s take a look at these flaws in more detail:

Expensive Price: The Isteady Multi is on the expensive side, especially when you consider the total cost after adding accessories. For example, if you want to charge your phone while using it with this gimbal, you need to buy an extra cable that costs $20 on Amazon. Another example is if you want to use a GoPro or a DSLR camera with this gimbal stabilizer: you have to buy another set of mounting plates just for those cameras (also $20). So if you plan on getting this device, be prepared to spend a little bit more than what you think initially.

Little Bulky: If compactness is important to you (especially when traveling), then this may not be the best choice because it sticks out farther than most other smartphone gimbals available today. It also has larger battery packs at either end which make it heavier than competing models with similar capabilities (but smaller batteries). Hard To Find Replacement Parts: Some customers had trouble finding replacement parts for their gimbals in case something was broken or lost. This can be especially concerning since anyone who uses one of these products will end to carry them around regularly so there’s always some risk that something could happen during transportation/storage/etc., which makes having easy access important! The Software Is Buggy And Slow: While there are many positives about Hohem’s software update app for smartphones (like how easy it was to connect over Bluetooth), there were also several complaints regarding bugs in both iOS and Android versions as well as slow download speeds when downloading new firmware updates from within the mobile app itself due To A Lack

10.3-Axis Stabilizer Gimbal

ColorRed-4887
BrandHohem
Compatible DevicesCellphone, Camera
Item Weight1.81 Kilograms

This 3-Axis Gimbal Stabilizer for iPhone 12 11 PRO MAX X XR XS Smartphone Vlog Youtuber Live Video Record with Sport Inception Mode Face Object Tracking is a nice gadget, at least when you are in travel or sports. You can shoot video by yourself and the 3-Axis Gimbal Stabilizer for iPhone 12 11 PRO MAX X XR XS Smartphone Vlog Youtuber Live Video Record with Sport Inception Mode Face Object Tracking makes your videos smoother and prettier. The most attractive point of this tool is its compact size, lightweight and portable design which can be easily put in your pocket or on the belt.

3-Axis Gimbal Stabilizer for iPhone 12 PRO MAX 11 X XR Smartphone YouTube Vlog Live Video Record with Sport Inception Mode Face Object Tracking Motion Time-Lapse, APP Control Auto Panorama – Hohem iSteady Mobile Plus

The 3-Axis Gimbal Stabilizer for iPhone 12 11 PRO MAX X XR XS Smartphone Vlog Youtuber Live Video Record with Sport Inception Mode Face Object Tracking Motion Time-Lapse – Hohem iSteady Mobile Plus is a stabilizer. It weighs 1.6 pounds and costs $149.99 on Amazon. Its dimensions are 5 x 4 x 3 inches and it works with both Apple and Android phones

【All-in-ONE 3-Axis Gimbal for iPhone 12 Pro Max/11 Pro Max/XS Max】The upgraded iSteady Mobile Plus offers all features you need for shooting like a PRO. No App needed. It provides flawless footages with the face/object tracking and inception mode, even if you walk or run. Everything is under your control via the trigger button. The new motion timelapse adds more fun to content creation.

iSteady Mobile Plus is a 3-axis gimbal stabilizer for iPhone 12 Pro Max/11 Pro Max/XS Max that turns your smartphone into a professional filmmaking camera, helping you capture smooth and stable footage with just your phone. iSteady Mobile Plus features all-in-one design, face & object tracking, auto panorama, and more creative modes. It provides everything iOS users need to create cinematic videos as easy as ABC.

3-Axis Gimbal Stabilizer

Phone gimbal stabilizers are designed to help record incredible moments of your life without any shake or blur so you can share your story with others in a cool way. The 3-axis stabilized gimbal feature allows it to support 270° panning, 320° tilting, and 240° rolling movements. It works with iPhone 12 Pro Max/11 Pro Max/XS Max to help reduce the shakiness while shooting incredible footages from front or back camera on the go!

User-Friendly Controls via Trigger Button

iSteady Mobile Plus features many shooting modes so you can record dynamic shots like professional cinematographers do. Just toggle the mode button for video recording, slow motion recording (60fps), motion time lapse, panorama shooting mode via trigger button manually. The intuitive user interface features built into the trigger button allow it to be controlled by one hand only and enable fast access to each mode through simple clicks of the trigger button. No more fumbling around during operation!

pro and cons of 3-Axis Gimbal Stabilizer for iPhone 12 11 PRO MAX X XR XS Smartphone Vlog

Pros:

  • The Gimbal is well made with a solid feel to it, which makes it easy to hold and operate. You get the impression you are holding something that is strong and can do the job.
  • The app is good and works well. It’s simple to use and does not get in the way of operation.

Cons:

  • Not very good at tracking moving objects smoothly; this gimbal has quite a bit of slop in its joints, so the camera tends to bounce around a lot when trying to track objects smoothly. I’m sure this would be even worse when using a phone without an optical image stabilization system, which my iPhone 12 Pro has built-in. I’d probably need something much more expensive for that kind of smooth tracking.
  • Good for tracking but not very good at panning; this gimbal has quite a bit of slop in its joints, so the camera tends to bounce around a lot when trying to track objects smoothly. I’m sure this would be even worse when using a phone without an optical image stabilization system, which my iPhone 12 Pro has built-in.*

【Tracking & Inception Mode】 Whether you’re running, jumping, or performing any other fast movements, the 3-axis stabilization tech allows the gimbal to automatically compensate for unwanted camera shakes and provide buttery smooth footage. With 40° of synchronous rotation on both the tilt and roll axes, get ready to take your Inception shots to a different level.

No matter what kind of moves you’re throwing, the 3-axis stabilization tech in our gimbal automatically compensates for unwanted camera shakes, giving you buttery smooth footage. You’ll be amazed at how much it can improve your videos.

When you’re ready to take your Inception shots to a different level, simply slide the mode dial to enter Inception mode and get started. With 40° of synchronous rotation on both the tilt and roll axes, our compact gimbal gives you everything you need to soar in filmmaking.

drwabacks of 3-Axis Gimbal Stabilizer for iPhone 12 11 PRO MAX X XR XS Smartphone Vlog

But, it does have its drawbacks. It’s only compatible with the iPhone 11 Pro Max and the iPhone 12 Pro Max. That means if you own an Android phone or another iPhone model, the 3-Axis Gimbal Stabilizer won’t work with your device, so you’ll have to consider other gimbals on this list.

Additionally, it doesn’t work with heavy camera lenses. If you already own a set of professional lenses for your Smartphone camera and want to use them with a gimbal, you may need a more advanced option.

Leave a Comment